Racing-style leather bracelet – Blue

• Available sizes: 18mm, 20mm and 22mm;
• Colour: Blue;
• Stitching: beige (only at the ends);
• Length: See size guide below;
• Thickness: 2.8mm;
• Material: Italian leather;
• Closure type: Buckle;
• Buckle finish: Polished (gloss) or Brushed (matt);
• Buckle colours: Silver, gold and black;
• Special features: The strap has ‘Quick Release’ pins (easy removal) fitted at the ends, making it quick and easy to change the strap. The pins are supplied with the strap; there is no need to purchase them separately.

Size guide:

How to choose the correct size:

To order the correct watch strap that will fit your watch perfectly, it is important to measure the size in advance. To do this, you simply need to measure the distance between the ends/lug holes of the watch case. This distance is the size of the strap. The image below illustrates this.

How to fit the strap to your watch:

Our replacement watch straps are supplied with two free pins (springs), depending on the size/model chosen. When you receive your new watch strap, it is time to fit it. First, you must remove your old watch strap.

Removing a Strap without a Quick Release System

Using the Multifunctional Tool or a similarly shaped accessory, follow these steps:

1. Insert the forked end of the tool between the strap and the watch lug.
2. Gently press to the left to make the pin appear.
3. Gently pull the strap downwards to remove it.
4. Repeat the process on the right-hand side of the watch, if necessary. Usually, you will only need to release one side for the strap to come loose.

Removing a Strap with a Quick-Release System

1. If the old strap has a quick-release system, simply press the visible spring on one side of the strap and pull the strap down slightly so that it comes loose.
2. Repeat the process on the other side.

Fitting the new Quick Release strap:

1. To fit it, simply position one of the strap pins into the corresponding hole in the watch case.
2. Then press the spring slightly to the left and fit the other pin into the corresponding hole in the watch.
3. Repeat the procedure on the other side of the watch.