Rustic Handmade Brown-Red

• Strap width: 18 mm / 19 mm / 20 mm / 21 mm and 22 mm;
• Colour: Brown;
• Stitching: Red (only at the ends);
• Length: 125mm + 75mm
• Thickness: varies along the strap between 2.7mm and 4.0mm;
• Material: Made in Portugal from genuine Crazy Horse leather;
• Clasp type: Buckle;
• Buckle material: Stainless steel;
• Buckle finish: Polished (gloss) or Brushed (matt);
• Buckle colours: Available in silver, black and gold;
• Special features: Quick-release springs already fitted to the strap (quick-release system).

Please note that this watch strap is designed to give a “vintage-style” appearance, i.e., an aged look, and for this reason the colour of the leather strap is likely to change and crack with wear.

About Crazy Horse leather:

Crazy Horse leather has been renowned for centuries for its beauty, strength and durability. The name derives from the leather’s popularity in the manufacture of horse saddles – riders appreciated the strength and beauty of this high-quality leather.  Crazy Horse leather is made from bovine leather – the finest quality natural leather. A natural wax coating is applied to the leather, which is then polished to achieve a beautiful, smooth finish.  Natural wear and tear and scratches from use enhance the beauty of this leather, as they alter the colour tone, creating a shimmering, multi-coloured effect – a characteristic typical of natural leather.

Our Rustic Handmade strap reflects the richness of natural leather, changing shade slightly with every crease and scratch. Crazy Horse leather is water-resistant; however, to prolong the life of the strap, we recommend that you do not wear it in very damp or dirty environments.

Size guide:

How to choose the correct size:

To order the correct watch strap, which will fit your watch perfectly, it is important to measure the size in advance. To do this, you simply need to measure the distance between the ends/lug holes of the watch case. This distance is the size of the strap. The image below illustrates this.

How to replace the strap:

Our replacement watch straps are supplied with two free standard pins (springs), according to the size chosen. If you purchase two or more straps, we provide a tool to assist with the replacement. When you receive your new watch strap, it’s time to fit it. First, you must remove your old watch strap. Use the Multifunctional Tool or a similarly shaped accessory.

1. Insert the forked end of the tool between the strap and the watch lug.
2. Gently press to the left to make the pin appear.
3. Gently pull the strap downwards to remove it.
4. Repeat the process on the right-hand side of the watch, if necessary. Usually, you will only need to release one side for the strap to come off.
5. Next, remove the pins from the old strap and reuse them, or replace them with the new ones that were sent with the strap.
6. To fit the new strap, slide the pins into the new strap and push them all the way in so that they are centred.
7. Using the replacement tool, press one end of the pin so that it clicks into the watch’s lug.
8. Repeat at the other end of the watch.